As an Amazon Associate, we earn from qualifying purchases. This post contains affiliate links – if you buy through them, we may earn a commission at no extra cost to you.
There’s no single best fish finder for an inflatable boat. The right one comes down to three things: how you’ll mount it, whether you want a screen or your phone, and how deep you fish. Inflatables have soft tubes and no solid console, so mounting options matter more here than on a fiberglass hull. These units also differ in sonar type, GPS, and display. Two products split most buyers: the Garmin Striker 4 Portable Kit for an all-in-one setup, and the Deeper PRO+ 2 if you’d rather cast your sonar and skip wiring.
1. Garmin 010-01550-00 Striker 4 with Transducer
Best for: someone who wants a simple, wired sonar unit
This is the straightforward pick. You get a keyed interface with dedicated buttons, so you’re not hunting through menus on the water. The 3.5-inch display is small, but that’s fine on an inflatable where space is tight. The CHIRP sonar sends a continuous sweep of frequencies, which the listing says creates crisper fish arches with better target separation.
The depth range is the headline here: 1,600 feet in freshwater and 750 feet in saltwater. For most inflatable boat fishing, that’s far more than you’ll ever need. The built-in flasher shows sonar data in the classic format, which suits vertical jigging or ice fishing. A waypoint map lets you mark brush piles, stumps, and docks, then navigate back to them.
The trade-off is that this is the head unit and transducer only. You supply the mount and power yourself, so on an inflatable you’ll need to sort out a bracket and a battery. The IPX7 water rating means it shrugs off spray and rain.
Good if:
- You’re happy to build your own mount and power setup
- You fish deep water and want sonar that reaches it
- You like physical buttons over touchscreen menus
Skip it if:
- You want a grab-and-go kit with nothing to figure out
- You’d rather use your phone as the display
2. Garmin Striker 4 with Portable Kit
Best for: someone who wants a complete, ready-to-go setup
This is the same Striker 4 sonar, bundled with a portable kit so it works straight out of the box. For an inflatable boat owner, that matters. You get the keyed interface and dedicated buttons, the waypoint map, CHIRP sonar, and the built-in flasher, all in one package. The listing says it now includes a kayak in-hull transducer mount, which suits kayak fishing too.
The depth range matches the standard unit: 1,600 feet freshwater, 750 feet saltwater, with 200 W RMS transmit power. The portable kit is the whole point here. Instead of sourcing a mount, a battery, and a carry solution separately, it arrives ready. On an inflatable, that’s the difference between fishing this weekend and fishing after a parts order.
The trade-off is the same small 3.5-inch screen as the standard version, and you’re paying for the bundled accessories rather than the sonar itself.
Good if:
- You want one box that covers the whole setup
- You move between boats and want to carry it easily
- You also fish from a kayak
Skip it if:
- You already have a mount and power source
- You want a larger screen
3. Garmin Striker Vivid 4cv
Best for: someone who wants color sonar and mapping
The Vivid 4cv steps up in two ways. First, it’s a color display with vivid scanning sonar color palettes, which the listing says make it easier to tell fish from structure. Second, it includes a GT20 transducer for both CHIRP traditional sonar and CHIRP ClearVü scanning sonar. That’s two sonar types in one unit.
It also adds high-sensitivity GPS to mark waypoints, create routes, and view your boat’s speed. And it includes built-in Quickdraw Contours mapping, so you can build your own depth maps of the water you fish. For an inflatable boat owner exploring unfamiliar lakes, that’s genuinely useful. A tilt and swivel bailmount bracket comes in the box.
The trade-off is that you’re still working with a small screen. It’s not for you if you want the simplest possible unit with the fewest features to learn.
Good if:
- You want color to separate fish from bottom
- You like building your own contour maps
- You want GPS and speed readout
Skip it if:
- You prefer a plain, no-frills sonar display
- You don’t need mapping or GPS
4. Humminbird 410150-1 PiranhaMAX 4
Best for: a first-time buyer who wants the basics done well
This is the simplest unit here. Dual beam sonar lets you choose a narrow beam for detail or a wide beam for a bigger coverage area, which helps you identify fish, structure, and contours. A tilt and swivel mount lets you adjust the viewing angle quickly, which is handy on an inflatable where you’re often sitting low.
It comes with everything you need to start: the PiranhaMAX 4 fish finder, the tilt and swivel mount, and an XNT 9 28 T transom-mount transducer. That’s a complete package with no extra parts to source. The listing backs it with a 1-year limited warranty.
The trade-off is that this is a basic unit. There’s no GPS, no mapping, and no color mentioned. It’s for you if you just want to see depth, fish, and structure without learning a feature set.
Good if:
- You’re buying your first fish finder
- You want a complete package with the transducer included
- You value a stated warranty
Skip it if:
- You want GPS and waypoint marking
- You need mapping features
5. Deeper PRO+ 2 Sonar Fish Finder
Best for: someone who wants no wiring and casts from shore or boat
This one changes the whole approach. There’s no screen and no mount. You cast the sonar unit out on a line, and it sends data to the Fish Deeper app on your phone over its own Wi-Fi. That’s ideal for an inflatable, because you don’t need to drill, clamp, or wire anything. The listing says it works for kayaks, boats, and ice fishing.
It has wide, mid, and narrow beams, so you can cover a large expanse or drill down on a specific spot. Accuracy runs up to 330 feet, with target separation of 0.4 inches on the narrow beam and 1 inch on the wide and mid beams. Built-in GPS lets you create bathymetric maps from the shore, dock, or bank, and saves them to the app.
It’s not for you if you want a fixed screen you glance at without picking up a phone.
Good if:
- You want zero installation on an inflatable
- You fish from shore or bank as well as from the boat
- You like mapping on your phone
Skip it if:
- You want a dedicated screen on the boat
- You’d rather not depend on a phone on the water
What to Look for in a Fish Finder for an Inflatable Boat
The two Striker units are close enough that the choice barely matters on sonar alone. They share the same CHIRP sonar, the same depth range, and the same flasher. What decides between them is whether you want to build your own mount and power setup or have it all in one box. The Striker Vivid and the PiranhaMAX sit further apart, since one adds color, GPS, and mapping while the other stays basic. The Deeper PRO+ 2 is genuinely different: no screen, no mount, no wiring.
Still Not Sure?
How often will I actually use it?
If it’s every trip, a fixed unit like the Garmin Striker 4 earns its place. If it’s occasional, the Deeper PRO+ 2 packs away and needs no install. Be honest about your trips before you choose.
Do I want a screen or my phone?
A dedicated screen means no phone battery worry and no app to open. The Garmin Striker Vivid 4cv gives you that with color. The Deeper PRO+ 2 puts everything on your phone instead.
What am I most likely to regret?
Usually the mount. On an inflatable, a unit with no mounting plan becomes a hassle. The Garmin Striker 4 Portable Kit solves that in one box, which is why it suits so many first setups.
Frequently Asked Questions
Will a fish finder work on an inflatable boat?
Yes, but mounting is the issue. Soft tubes don’t take screws well, so a portable kit or a castable unit avoids the problem. The Garmin Striker 4 Portable Kit and the Deeper PRO+ 2 both sidestep drilling entirely.
What depth can a fish finder read on an inflatable?
It depends on the unit. The Garmin Striker 4 and the Portable Kit both list 1,600 feet freshwater and 750 feet saltwater. The Deeper PRO+ 2 lists accuracy up to 330 feet. Match that to the water you fish.
Do I need GPS on a fish finder for an inflatable boat?
Not always, but it helps. GPS lets you mark spots and return to them. The Garmin Striker Vivid and the Striker both include waypoint maps, and the Deeper PRO+ 2 adds bathymetric mapping through its app.
Can I use a castable fish finder from an inflatable?
Yes. A castable unit like the Deeper PRO+ 2 needs no mount, so it suits an inflatable well. You cast it out and read the sonar on your phone.
Conclusion
One situation splits buyers most: a fixed screen you mount versus a castable unit you throw. For the first, the Garmin Striker 4 Portable Kit covers the whole setup. For the second, the Deeper PRO+ 2 needs no install at all. Pick your situation, then check the listing on Amazon for the specs that matter to you.





